VOGERIDERS.NET Independent Voge owner resource

ENESDE

SR16 125

2025 - 2026

Scooter

Torque specifications

Source: Voge SR16 - Owner's Manual (English), PDF page 70.

Values from the manual's 'Routine check table for key fastening parts'.
Steering stem dust-proof nut uses a non-standard preload procedure - see notes column.
Two ABS-oil-tube entries for the same fastener category but different positions: 24 N·m on the controller side, 35 N·m on the brake-pump side.

Notes from the manual (3)

Values from the manual's 'Routine check table for key fastening parts'.
Steering stem dust-proof nut uses a non-standard preload procedure - see notes column.
Two ABS-oil-tube entries for the same fastener category but different positions: 24 N·m on the controller side, 35 N·m on the brake-pump side.

Wheels & Brakes

Ref	Fastener	Thread	Qty	Torque
1	Brake lower pump bolt Front + rear disc brake pump Ref 1 · M8×1.25 · Qty 4	M8×1.25	4	30 ± 4 N·m
6	Front wheel bolt + nut Front wheel and front shock absorber Ref 6 · M12×1.25 · Qty 1	M12×1.25	1	50 ± 5 N·m
7	Disc brake plate bolt Front (5×) and rear (4×) disc to wheel hub Ref 7 · M8×1.25 · Qty 9	M8×1.25	9	26 ± 4 N·m
8	Gear ring (ABS) bolt ABS ring gear to wheel (3 front + 4 rear) Ref 8 · M5 · Qty 7	M5	7	4.5 ± 0.9 N·m
19	Rear output shaft locking nut Output shaft of rear wheel Ref 19 · M16×1.5 · Qty 1	M16×1.5	1	120 ± 5 N·m
22	Brake upper pump bolt Front + rear brake upper pump to handlebar Ref 22 · M6 · Qty 4	M6	4	9 ± 1.35 N·m
23	ABS oil tube bolt (controller) ABS controller to ABS oil tube Ref 23 · M10×1.0 · Qty 4	M10×1.0	4	24 ± 3 N·m
24	ABS oil tube bolt (pump) Front + rear brake pump to ABS oil tube Ref 24 · M10×1.25 · Qty 4	M10×1.25	4	35 ± 5.25 N·m

Steering & Suspension

Ref	Fastener	Thread	Qty	Torque
2	Handlebar bolt + nut Handlebar and steering stem Ref 2 · M10×1.25 · Qty 1	M10×1.25	1	60 ± 5 N·m
3	Steering stem dust-proof nut Steering stem and frame Ref 3 · M26×1 · Qty 1	M26×1	1	Special procedure
Special procedure: Steering stem dust-proof nut Fasten front wheel to 80 N·m, swing left and right twice, back off 1/2 turn, then lock at 10 N·m. Bearing-preload procedure - get this wrong and steering binds or develops play.
4	Steering stem locking nut Steering stem and frame Ref 4 · M26×1 · Qty 1	M26×1	1	65 ± 5 N·m
5	Front shock absorber bolt Front shock and steering stem Ref 5 · M10×1.25 · Qty 4	M10×1.25	4	40 ± 5 N·m
12	Rear shock absorber nut Left rear shock to frame (×2) Ref 12 · M12×1.25 · Qty 2	M12×1.25	2	50 ± 5 N·m
13	Rear shock absorber bolt L shock to engine, R shock to connective piece Ref 13 · M8×1.25 · Qty 2	M8×1.25	2	26 ± 4 N·m
18	Rear shock connective bolt Connective piece and engine Ref 18 · M10×1.25 · Qty 2	M10×1.25	2	40 ± 5 N·m

Engine & Frame

Ref	Fastener	Thread	Qty	Torque
9	Fuel tank bolt Fuel tank and frame Ref 9 · M8×1.25 · Qty 4	M8×1.25	4	22 ± 3.3 N·m
10	Side stand bolt + nut Side stand and frame Ref 10 · M10×1.25 · Qty 1	M10×1.25	1	40 ± 5 N·m
11	Engine holder shaft + nut Engine holder to frame (×2) Ref 11 · M10×1.25 · Qty 2	M10×1.25	2	50 ± 5 N·m
21	Air filter bolt Air filter and engine Ref 21 · M6 · Qty 2	M6	2	9 ± 1.35 N·m
25	High-pressure fuel tube clamp Fuel tube and secondary filter Ref 25 · Clamp kit · Qty 2	Clamp kit	2	4.5 ± 0.5 N·m

Bodywork & Accessories

Ref	Fastener	Thread	Qty	Torque
14	Pillion step bolt L+R pillion step kits to frame (4 total) Ref 14 · M8×1.25 · Qty 4	M8×1.25	4	22 ± 3.3 N·m
15	Windshield bracket bolt + nut Windshield bracket and frame Ref 15 · M8×1.25 · Qty 2	M8×1.25	2	26 ± 4 N·m
16	Muffler cap-shaped nut Muffler to engine Ref 16 · M8×1.25 · Qty 2	M8×1.25	2	26 ± 4 N·m
17	Muffler bolt Muffler to rear shock connective piece Ref 17 · M8×1.25 · Qty 3	M8×1.25	3	26 ± 4 N·m
20	Rear luggage case bolt Rear luggage case and frame Ref 20 · M8×1.25 · Qty 3	M8×1.25	3	22 ± 3.3 N·m