Service guides

Procedure for replacing the coolant on the Voge DS900X. Covers the drain points, coolant specification, capacity and air bleeding, with the points where the official manuals differ.

How to check and adjust the chain on the DS900X to spec, plus pre-ride inspection, cleaning, and the lubricants that won't damage the O-rings.

Procedure for changing engine oil and the secondary oil filter on the Voge DS900X (KEL895 / Loncin LX286MX engine). Capacities, torques, oil grade and service intervals, with the points where the official manuals differ.

What gets done at the 1,000 km first service (fluids, fasteners, adjustments) plus what break-in actually means in practice.

How to clear the maintenance indicator on the DS900X TFT after an oil change or scheduled service, using the My motorcycle menu.

Procedure for checking and adjusting valve clearances on the Voge DS900X (KEL895 / Loncin LX286MX engine). Inlet 0.11-0.20 mm, exhaust 0.26-0.35 mm, shim adjustment under the swinging arm.

Procedure for changing engine oil and the secondary oil filter on the Voge DS800X Rally (KEL800 / Loncin LX284MW engine). Capacities, torques and oil grade from the official manuals, including the values where those manuals differ.

Procedure for replacing the coolant on the Voge DS800X Rally (KEL800 engine). Drain point, G40-spec coolant, refill and air-bleed methods from the official manuals, including the values where those manuals give different values.

Procedure for checking and adjusting valve clearances on the Voge DS800X Rally (KEL800 / Loncin LX284MW engine). Intake 0.15-0.20 mm, exhaust 0.20-0.25 mm, adjusting washer (shim) under the swinging arm.

Procedure for replacing the coolant on the Voge DS625X (KEL600 engine). Capacity, fluid grade, drain and refill steps, bleed procedure.

Valve clearance specifications and inspection schedule for the Voge DS625X (KEL600 engine). Why it matters, how to know when adjustment is needed, and why this is a dealer job.

Procedure for changing engine oil and the oil element on the Voge DS625X (KEL600 engine). Capacities, oil grade, drain plug procedure.

What the 1,000 km first service covers on Voge's 581 cc KEL600 platform: break-in rules, items list, and where the manual ends and reality begins.

Procedure for replacing the coolant on the Voge DS525X (KEL500F engine). Coolant specification, capacity, drain bolts and air bleeding from each official manual, with the points where they differ.

Procedure for changing engine oil and the oil element on the Voge DS525X (KEL500F engine). Oil grade, capacities and drain bolt torque from each official manual, with the points where they differ.

Valve clearance specification, inspection interval and the workshop check and shim procedure for the Voge DS525X (KEL500F engine), with the points where the official manuals differ.

Periodic maintenance table and key fastener torques from Voge's official DS525X owner manual, with the different intervals in the KEL500F workshop manual and the Hungarian owner's manual.

What the 1,000 km first service covers on Voge's 581 cc KEL600 platform: break-in rules, items list, and where the manual ends and reality begins.

Periodic-maintenance interval table, fluids and key fastener torques from Voge's official SR1 ADV owner manual. The steering stem dust nut uses a tighten, settle and lock sequence rather than a single torque value.

Periodic-maintenance interval table, fluids and key fastener torques for the SR4 Max CVT scooter, from the owner's manual and the KS350 engine repair manual. Services run every 5,000 km, with a CVT belt replacement at 20,000 km.