Voge DS900X Service & Maintenance

Sources

Torque table owner's manual, PDF page 89
Service intervals owner's manual, PDF page 88
All 8 documents

The owner's manual PDF is 21.3 MB.

Service guides

DS900X Coolant Change & Cooling System Bleed

Procedure for replacing the coolant on the Voge DS900X. Covers the drain points, coolant specification, capacity and air bleeding, with the points where the official manuals differ.

Updated Oct 11, 2026

DS900X - Chain Slack Adjustment

How to check and adjust the chain on the DS900X to spec, plus pre-ride inspection, cleaning, and the lubricants that won't damage the O-rings.

Updated Oct 11, 2026

DS900X Engine Oil & Secondary Oil Filter Change

Procedure for changing engine oil and the secondary oil filter on the Voge DS900X (KEL895 / Loncin LX286MX engine). Capacities, torques, oil grade and service intervals, with the points where the official manuals differ.

Updated Oct 11, 2026

DS900X First Service (1,000 km)

What gets done at the 1,000 km first service (fluids, fasteners, adjustments) plus what break-in actually means in practice.

Updated Oct 11, 2026

DS900X Service Indicator Reset

How to clear the maintenance indicator on the DS900X TFT after an oil change or scheduled service, using the My motorcycle menu.

Updated Oct 11, 2026

KEL895 Valve Clearance - Inspection & Adjustment (DS900X)

Procedure for checking and adjusting valve clearances on the Voge DS900X (KEL895 / Loncin LX286MX engine). Inlet 0.11-0.20 mm, exhaust 0.26-0.35 mm, shim adjustment under the swinging arm.

Updated Oct 11, 2026

Service intervals

The owner's manual maintenance plan (PDF page 88), as printed, item names and spelling included: whichever of time or distance comes first. Columns are thousands of km.

I Inspection · C Clean · R Replacement · A Adjustment · L Lubrication

The table scrolls sideways to 35k.

Maintenance intervals for the DS900X, by thousands of km
Item	Time	1k	5k	10k	15k	20k	25k	30k	35k
Lubricant		R	I	R	I	R	I	R	I
Lubrication element		R	none	R	none	R	none	R	none
Check lubricant level		I	I	I	I	I	I	I	I
Check seal performance for fuel tube		I	I	I	I	I	I	I	I
Check the fuel pump element		none	none	I	none	I	none	I	none
Throttle valve body/Carburetor		none	C	C	C	C	C	C	C
Check coolant level		I	I	I	I	I	I	I	I
Coolant 2 years	2 years	none	none	none	none	none	none	R	none
Check seal performance of air inlet system		I	I	I	I	I	I	I	I
Valve clearance	Check every 20000km
Spark plug clearance		none	I	I	I	R	I	I	I
Air filter element		I	C	C	C	R	C	C	C
Clutch operation system		none	A	A	A	R	A	A	A
Check lubrication and tightness for steering bearing		I	I	L	I	L	I	L	I
Check lubrication for Fr. & Rr. Wheel and sprocket base bearing		none	L	L	L	L	L	L	L
Check lubrication for tuning shaft of main and pillion steps		none	L	L	L	L	L	L	L
Main station frame, side support shaft lubrication check		none	L	L	L	L	L	L	L
Check lubricant for brake and clutch lever shaft		none	L	L	L	L	L	L	L
Check lubrication for bearing of rear fork shaft		none	L	L	L	L	L	L	L
Check lubrication for driving chain		A	A	A	A	R	A	A	A
Battery voltage		none	I	I	I	I	I	I	I
Seal performance for brake oil tube		I	I	I	I	I	I	I	I
Brake liquid 2 years	2 years	I	I	I	I	I	I	I	I
Brake liquid level		I	I	I	I	I	I	I	I
Fr.& Rr. Brake pads	Do not allow the wear of the brake friction plate to exceed the minimum allowable thicknes
Fr.& Rr. Brake switch		I	I	I	I	I	I	I	I
Check fuel evaporation system		I	I	I	I	I	I	I	I
Check tightness of fastening pars on body		I	I	I	I	I	I	I	I
Check leakage for Fr. & Rr. shock absorbers		I	I	I	I	I	I	I	I
SLIDER,DRIVE CHAIN	First 10000 km inspection, after every 20000 km replacement.

I Inspection · C Clean · R Replacement · A Adjustment · L Lubrication